HITEC HFP-30 Digital Servo Programmer Tester

Manual Video Spare Parts Powering On Main Screens 1. Main Programming Screen 2. Main Servo Test Screen Test Mode 1. Manual Test 2. Auto Test 3. Auto Deadband Testing 4. Settings D Series Program Mode 1) Set EPA/Neutral 2) Servo Sync 3) Set Rotation (CW_CCW) 4) Set Deadband (DB_Width) 5) Set Speed 6) Set ID (ID_Read) 7) Set Failsafe 8) Set Soft Start 9) Factory Reset (Factory Default Set) 5/7 Series Program Mode (For 5xxx*/7xxx Servos) 1) Set EPA/Neutral 2) Servo Sync 3) Set Rotation (CW_CCW) 4) Set Deadband (DB_Width) 5) Set Speed 6) Set Failsafe 7) Set Resolution 8) Set Overload Protection (OLP)