DESCRIPTION

- A completely new design/variant from the ground-up.
- 6S 5000-6000mAh lipo can easily achieve 4-5+ minutes of managed flight time.
- Manufactured with durable and quality EPO foam, not EPS.
- Complete screw-together assembly without the need for any glue.
- Scale outline, including open vents between the fuselage and intakes, and downward angled wingtip rails never before seen in a foam F-18.
- Completely concealed elevator servos and elevator control hardware for less drag and clean scale outline.
- Full coverage plastic undercarriage doors.
- Aluminum suspension undercarriage.
- Trailing link struts.
- Low visibility rudder servo placement.
- Low visibility flap servo placement and geometry.
- All-new plastic Fowler flap arm hinges to mimic those on the real F-18.
- Removable plastic-tipped magnetic nose cone.
- Removable wings with QD wing harness.
- LED lighting on nose strut, chines, and dorsal.
- Large battery bay for battery, MFCB, and gyro.
- Sharp and shallow panel lines in sensible areas without reducing overall scale effect.
- Pre-molded wing station to accept Freewing’s MWS plastic slot system (aftermarket pylons, ordnance, 3DP, Runcam, etc).
- Quick Service servo plates on the wings and vertical stabilizers (screws, not glue).
- Plastic lined coaming to resist bubbling under the canopy.
- Plastic tipped nosecone, capped intake lips and wingtip rails with pre-installed MWS slot.
- Plastic nozzles with two-tone metallic paint job.

SPECIFICATION

Model Scale

1 : 11 Scale

Wingspan

1034mm / 40.7in

Length

1500mm /59.05in

Empty Weight

2640g / 93.12oz (w/o battery)

CG (Center of Gravity)

88mm (3.4") from the leading edge of the wing at the root

Power System

6S 3748-1750Kv Brushless Outrunner Motor

Electronic Speed Control

130A, EC5 Connector

Propeller / EDF

90mm 9-Blade EDF

Servos
9g digital hybrid gear standard with 200mm lead : left rudder, right rudder - MD31093-200
9g digital hybrid gear standard with 300mm lead : left aileron, right aileron - MD31093-300
9g digital hybrid gear reverse with 400mm lead : nose gear steering - MD31093R-400
9g metal gear standard with 200mm lead : left flap, right flap - MD31092-200
23g metal gear standard with 100mm lead : left elevator - MD31231-100
23g metal gear reverse with 100mm lead : right elevator - MD31231R-100

Landing Gear

Electronic retractable main gear and steerable nose gear with all metal shock absorbing struts

Required Battery

6S 22.2V 5000-6000mAh LiPo with EC5 connector (required)

Required Radio

6 Channel (required)

Ailerons

Yes

Elevator

Yes

Rudder

Yes