DESCRIPTION
– A completely new design/variant from the ground-up.
– 6S 5000-6000mAh lipo can easily achieve 4-5+ minutes of managed flight time.
– Manufactured with durable and quality EPO foam, not EPS.
– Complete screw-together assembly without the need for any glue.
– Scale outline, including open vents between the fuselage and intakes, and downward angled wingtip rails never before seen in a foam F-18.
– Completely concealed elevator servos and elevator control hardware for less drag and clean scale outline.
– Full coverage plastic undercarriage doors.
– Aluminum suspension undercarriage.
– Trailing link struts.
– Low visibility rudder servo placement.
– Low visibility flap servo placement and geometry.
– All-new plastic Fowler flap arm hinges to mimic those on the real F-18.
– Removable plastic-tipped magnetic nose cone.
– Removable wings with QD wing harness.
– LED lighting on nose strut, chines, and dorsal.
– Large battery bay for battery, MFCB, and gyro.
– Sharp and shallow panel lines in sensible areas without reducing overall scale effect.
– Pre-molded wing station to accept Freewing’s MWS plastic slot system (aftermarket pylons, ordnance, 3DP, Runcam, etc).
– Quick Service servo plates on the wings and vertical stabilizers (screws, not glue).
– Plastic lined coaming to resist bubbling under the canopy.
– Plastic tipped nosecone, capped intake lips and wingtip rails with pre-installed MWS slot.
– Plastic nozzles with two-tone metallic paint job.
SPECIFICATION
Model Scale
1 : 11 Scale
Wingspan
1034mm / 40.7in
Length
1500mm /59.05in
Empty Weight
2640g / 93.12oz (w/o battery)
CG (Center of Gravity)
88mm (3.4″) from the leading edge of the wing at the root
Power System
6S 3748-1750Kv Brushless Outrunner Motor
Electronic Speed Control
130A, EC5 Connector
Propeller / EDF
90mm 9-Blade EDF
Servos
9g digital hybrid gear standard with 200mm lead : left rudder, right rudder – MD31093-200
9g digital hybrid gear standard with 300mm lead : left aileron, right aileron – MD31093-300
9g digital hybrid gear reverse with 400mm lead : nose gear steering – MD31093R-400
9g metal gear standard with 200mm lead : left flap, right flap – MD31092-200
23g metal gear standard with 100mm lead : left elevator – MD31231-100
23g metal gear reverse with 100mm lead : right elevator – MD31231R-100
Landing Gear
Electronic retractable main gear and steerable nose gear with all metal shock absorbing struts
Required Battery
6S 22.2V 5000-6000mAh LiPo with EC5 connector (required)
Required Radio
6 Channel (required)
Ailerons
Yes
Elevator
Yes
Rudder
Yes
Flaps
Yes
Lights
Yes
Hinge Type
Nylon Reinforced
Material
EPO Foam
Skill Level
Intermediate/Advanced
Build Time
3-4 Hours
Recommended Environment
Outdoor, 150+ foot paved runway or short manicured grass
Reviews
There are no reviews yet.