JP Hobby 120mm 12/14S 12 Blade Metal EDF

Manual Video Spare Parts Jingpin Hobby 120mm EDF Specification Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight. – aluminium shroud body heat sink and cooler structure assures your motor will run cooler. – The high rigid structure design is capable of running up to 88,000 RPM to produce extremely high efflux velocity for maximum speed and efficiency -Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the best replacement for your plastic or carbon shroud if you want to have a safety EDF fan. -Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine for calibration, making it bring a better and safer user experience for every RC fan. SPECIFICATIONS: Material: Aluminum Alloy Weight: 24.5 oz./ 695g Rotor:12-bladed Outer Diameter: 123mm Inner Diameter: 120mm Inlet Ring: Removable 12S Li-Po Set Up: RPM: 33,744 Kv Rating: 760 Battery: 12s 44.4V Watt: 4972W Static Thrust: 16.6 lb./ 7.53kg(thrust) (Estimated) Start: Soft Timing: Low Amp Rating: 120-130HV amp esc or higher Speed Control Advanced Timing Setting: 15 Degrees Testing report: For 12S: Voltage-44.4V, Current-110A, Watt-4884W, Thrust-7.2KG Voltage-48V, Current-125A, Watt-6000W, Thrust-8.3KG Voltage-50V, Current-142A, Watt-7100W, Thrust-9.3KG For 14S: Voltage-51.8V, Current-107A, Watt-5542.6W, Thrust-8KG Voltage-56V, Current-123A, Watt-6888W, Thrust-9.25KG Voltage-58.8V, Current-133A, Watt-7820.4W, Thrust-9.8KG VIDEO NOTE: While the video shows the edf unit operating on 39 and 40 volts, this is only for demonstration purposes and is not intended to run at this voltage in a jet. Doing so exceeds the motors parameters and can damage the motor. This is not covered under warranty.